Silicon Components Private Limited

We are offering MCP3201-BI/P Integrated Circuits to our clients. The MCP3201 12-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP3201 features a successive approximation register (SAR) architecture and an industry-standard SPI serial interface, allowing 12-bit ADC capability to be added to any PIC® microcontroller. The MCP3201 features low power consumption and is available in packages. Applications for the MCP3201 include data acquisition, instrumentation and measurement, multi-channel data loggers, industrial PCs, motor control, robotics, industrial automation, smart sensors, portable instrumentation & home medical appliances.

Additional Information:

• Item Code: MCP3201

We are offering MCP3301-BI/P Integrated Circuits to our clients. The MCP3301 13-bit Analog to Digital Converter (ADC) features a fully differential input and low power consumption in a small package that is ideal for battery-powered systems and remote data acquisition applications. The industry-standard SPI™ serial interface enables ADC capability to be added to any PICmicro® microcontroller. The MCP3301 features 100k samples/second, 1 input channel, low power consumption, and is available in 8-pin PDIP, SOIC, and MSOP packages. The full differential input of the MCP3301 enables a wide variety of signals to be used in applications such as remote data acquisition, portable instrumentation, and battery operated applications.

We are offering MCP3221A5T-I/OT Integrated Circuits to our clients. The MCP3221 is a successive approximation A/D converter with 12-bit resolution. Available in the SOT-23 package, this device provides one single-ended input with very low power consumption. The MCP3221 provides a low maximum conversion current and standby current. Low current consumption combined with the small package makes this device ideal for battery powered and remote data acquisition applications. Communication to the MCP3221 is performed using a 2-wire I2C™Compatible compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C™Compatible modes are available with the device. An on-chip conversion clock enables independent timing for the I2C™Compatible clock and the conversion clock.The device is also addressable allowing up to eight devices on a single 2-wire bus. The MCP3221 runs on a single supply voltage that operates over a broad range. This device also provides excellent linearity of ±1 LSB differential non-linearity and ±2 LSB integral non-linearity.

We are offering MCP3202-BI/P Integrated Circuits to our clients. The MCP3202 12-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP3202 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial interface, allowing 12-bit ADC capability to be added to any PICmicro® microcontroller. The MCP3202 features low power consumption and is available in packages. Applications for the MCP3202 include data acquisition, instrumentation and measurement, multi-channel data loggers, industrial PCs, motor control, robotics, industrial automation, smart sensors, portable instrumentation and home medical appliances.

We are offering MCP3204-BI/P Integrated Circuits to our clients. The MCP3204 12-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP3204 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial interface, allowing 12-bit ADC capability to be added to any PICmicro® microcontroller. The MCP3204 features low power consumption and is available in packages. Applications for the MCP3204 include data acquisition, instrumentation and measurement, multi-channel data loggers, industrial PCs, motor control, robotics, industrial automation, smart sensors, portable instrumentation and home medical appliances.

We are offering MCP3204-BI-SL Integrated Circuits to our clients. The MCP3204 12-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP3204 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial interface, allowing 12-bit ADC capability to be added to any PICmicro® microcontroller. The MCP3204 features, low power consumption, and is available in packages. Applications for the MCP3204 include data acquisition, instrumentation and measurement, multi-channel data loggers, industrial PCs, motor control, robotics, industrial automation, smart sensors, portable instrumentation & home medical appliances.

We are offering MCP3208-CI/P Integrated Circuits to our clients. The MCP3208 12-bit Analog-to-Digital Converter (ADC) combines high performance and low power consumption in a small package, making it ideal for embedded control applications. The MCP3208 features a successive approximation register (SAR) architecture and an industry-standard SPI™ serial interface, allowing ADC capability to be added to any PICmicro® microcontroller. The MCP3208 features 100k samples/second, 8 input channels, low power consumption, and is available in packages. Applications for the MCP3208 include data acquisition, instrumentation and measurement, multi-channel data loggers, industrial PCs, motor control, robotics, industrial automation, smart sensors, portable instrumentation and home medical appliances.

We are offering MCP3425A0T-E/CH Integrated Circuits to our clients. The MCP3425 is a single channel low-noise, high accuracy delta-sigma A/D converter with differential inputs and good resolution in a small package. The onboard precision reference voltage. The device uses a two-wire I2C™ compatible serial interface and operates from a single power supply. The MCP3425 device performs conversions at rates of 15, 60 or 240 samples per second with corresponding resolutions of 16, 14 and 12 bits. This is adjustable through the user controllable configuration bit settings using the two-wire I2C™ compatible serial interface. This device has an onboard programmable gain amplifier (PGA). The user can select the PGA gain of x1, x2, x4, or x8 before the analog-to-digital conversion takes place. This allows the MCP3425 device to convert a smaller input signal with high resolution. The device has two conversion modes: (a) Continuous mode and (b) One-Shot mode. In the One-Shot mode, the device enters a low current standby mode automatically after one conversion. This reduces current consumption greatly during idle periods. The MCP3425 device can be used for various high accuracy analog-to-digital data conversion applications where ease of use, low power consumption, and small footprint are major considerations.

We are offering MCP4822 Digital to Analog Converter(ADC)Integrated Circuits to our clients. The MCP4822 is a dual channel 12-bit DAC with an internal voltage reference. This device offers high accuracy and low power consumption and is available in various packages. Communication with the device is accomplished via a simple serial interface using SPI protocols. The MCP4822 device is a part of the MCP4802/MCP4812/MCP4822 product family, which are dual channel 8-bit/10-bit/12-bit DACs with an internal voltage reference (VREF). These devices provide very high accuracy and low noise performance and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If only a single output is needed then the MCP4801/4811/4821 single channel product family can be used.

We are offering  MCP4921-E/SN IC Microchip to our clients. The MCP4921 device is a single channel 12-bit DAC which uses an external voltage reference. This device offers high accuracy and low power consumption, and is available in various packages. Communication with the device is accomplished via a simple serial interface using SPI protocols. The MCP4921 device is a part of the MCP4901/MCP4911/MCP4921 product family, which are single channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance, and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If two outputs are needed then the MCP4902/412/4922 dual channel product family can be used.

We are offering MCP3421A1T-E/CH Analog to Digital Converter to our clients. The MCP3421 is a single channel low-noise, high accuracy delta-sigma A/D converter with differential inputs.  The device uses a two-wire I2C™ compatible serial interface and operates from a ranging single power supply. The MCP3421 device performs conversions at nice rates per second depending on user controllable configuration bit settings using the two-wire I2C™ compatible serial interface. This device has an onboard programmable gain amplifier (PGA). The user can select the PGA gain of X1, X2, X4, or X8 before the analog-to-digital conversion takes place. This allows the MCP3421 device to convert a smaller input signal with high resolution. 
The device has two conversion modes: (a) Continuous mode(b) One-Shot mode
In the One-Shot mode, the device enters a low current standby mode automatically after one conversion. This reduces current consumption greatly during idle periods. The MCP3421 device can be used for various high accuracy analog-to-digital data conversion applications where ease of use, low power consumption, and small footprint are major considerations.

We are offering MCP4811-E/SN Digital-To-Analog Converter IC to our clients. The MCP4811 is a single channel 10-bit DAC with an internal voltage reference. This device offers high accuracy and low power consumption and is available in various packages. Communication with the device is accomplished via a simple serial interface using SPI protocols. The MCP4811 device is a part of the MCP4801/MCP4811/MCP4821 product family, which are single channel 8-bit/10-bit/12-bit DACs with an internal voltage reference (VREF). These devices provide very high accuracy and low noise performance and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If two outputs are needed then the MCP4802/4812/4822 dual channel product family can be used.

We are offering ADS1146IPW 16-Bit, 2-KSPS Analog-to-Digital Converters to our clients. We provide high-quality products to our clients. Taking distribution of electronic components to the next level. Our aim is to provide a quick and efficient response to our customers' ongoing needs and requirements. It is available with Programmable Gain Amplifier (PGA) for Sensor.

We are offering MCP4912-E/SL IC to our clients. MCP4912 is a dual channel, 10-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages such as DIP, SOIC and TSSOP Packs as in pictures.

Additional Information:

• Item Code: MCP4912

 We are offering MCP4728-E/UN Digital to Analog Converter IC to our clients. The MCP4728 device is a quad voltage output Digital-to-Analog Converter (DAC) with a non-volatile memory (EEPROM). The user can program the DAC input codes, device configuration bits, and I2C address bits to the non-volatile memory (EEPROM) by using I2C™ Compatible interface commands. The non-volatile memory feature enables the DAC device to hold the DAC input codes during the power-off time, allowing the DAC outputs to be available immediately after power-up.

We are offering MCP4921-E/P Digital to Analog Converter IC to our clients. The MCP4921 device is a single channel 12-bit DAC which uses an external voltage reference. This device offers high accuracy and low power consumption, and is available in various packages. Communication with the device is accomplished via a simple serial interface using SPI protocols. The MCP4921 device is a part of the MCP4901/MCP4911/MCP4921 product family, which are single channel 8-bit/10-bit/12-bit DACs which use external voltage reference (VREF). These devices provide very high accuracy and low noise performance and are suitable for consumer and industrial applications, such as set point control, offset adjustment and sensor calibration applications. The low power consumption and small package options make these devices very attractive for many portable and battery-powered applications. If two outputs are needed then the MCP4902/412/4922 dual channel product family can be used.

MCP4922 is a dual channel, 12-bit DAC with an external voltage reference and SPI interface. It offers high accuracy and low power consumption and is available in various packages.